Product details
This series of equipments are used for taking asphalt out of drums and heating up asphalt.
They also have the dehydration function for asphalt. They make use of hot gas of Burner to
melt and take asphalt out of drums, and use flues and a few of heating coil pipes of thermal oil
to heat up asphalt.
Main Performance Characteristics
1. Protecting environment: close construction and no pollution;
2. Saving energy sources:to make fully use of hot gas of diesel oil burner to melt and take asphalt out of
drums, to heat the asphalt in oil pool by gas and hot oil together which is heat transfering efficient and energy saving. The main body is closed type, good performance on heat insulation and less on heat loss.
3. Taking asphalt out of drums thoroughly: Use hot gas (above 350℃) to directly heat up the wall of asphalt
drums. No waste and No pollution;
4. Better dehydration: it uses asphalt pump with large output to realize the inner-cycle of asphalt, The
overflowing vapor be exhausted by draught fan, and to realize sub-atmospheric dehydration;
5.Well-adopted: available for varioud kinds of drums domestic and abroad., deformation on drum does not affect the operation.
6. High reliability: introduced the auto-control system,use imported automatic ignition burner which can realize automatic control according to the oil temp., Meantime equipped with supervisory instrument.
7. Easy to assemble and disassemble.
Model |
LT5 |
LT3 |
LT2 |
LT2A |
LT1 |
LT1A |
Productivity (t/h) |
5~6 |
3~4 |
2~3 |
2~3 |
1~1.5 |
1~1.5 |
Drum Numbers of per Batch |
32 |
26 |
16 |
20 |
8 |
12 |
Capacity of Asphalt Pool (m3) |
16 |
13 |
6 |
7.5 |
4 |
5 |
Fuel Consumption (kg/h) |
<40 |
<26 |
<18 |
<22 |
<14 |
<16 |
http://www.dgroadequipment.com/