Product details
Model Number: 08500H-#1490
Brand Name: SP
Key Specifications/Special Features:
Key specifications/special features: ODM/OEM orders are welcomeCustomized battery is acceptedCan print your logoProvide samples for testingMore than 2000 lithium ion battery models for choice.Parameters:
Model: 08500H 3.7V 305mAh
Finished resistance: ≤90MΩ
Rated capacity: 305mAh
Charging temperature range: 10-45℃
Nominal voltage: 3.7V
Discharging temperature range: -10℃--50℃
Dimensions: 50mm×8.5mm
Advantages:
1. Long cycle lifespan: more than 500 cycles
2. Quality assurance and price concessions
3. High voltage and energy density
4. Low self-discharge
5. Environment-friendly
6. No memory effect
7. High safety
8. Can use any object shape
Model: 08500H 3.7V 305mAh
Finished resistance: ≤90MΩ
Rated capacity: 305mAh
Charging temperature range: 10-45℃
Nominal voltage: 3.7V
Discharging temperature range: -10℃--50℃
Dimensions: 50mm×8.5mm
Advantages:
1. Long cycle lifespan: more than 500 cycles
2. Quality assurance and price concessions
3. High voltage and energy density
4. Low self-discharge
5. Environment-friendly
6. No memory effect
7. High safety
8. Can use any object shape
Item | Spec | Remark |
Typical capacity | 305mAh | Discharge:0.2C |
Minimum capacity | 300mAh | cut-off voltage:3.0V |
Rate | 300mAh | |
Energy | 0.7Wh | |
Nominal voltage | 3.7V | Discharge:0.2CmA |
AC Impedance resistance | ≤90mΩ | ≤90mΩ |
Discharge cut-off voltage | 3.0V | |
Charge voltage | 4.20V | |
Max. Charge Voltage | 4.23V | |
Charge time | Approx. 3.0h | Charge: 95mA |
Standard charge current | 60mA | 0.2C |
Max. Charge Current | 300mA | 1.0C |
Operating temperature | 10~+45℃ | Charge |
Operating temperature | -10~+50℃ | Discharge |
Storage temperature | -10~35℃ | Recommended storagetemperature: 20℃ |
Dimensions | Diameter:8.5mm Length: 50.0mm |
|
product weight | ||
Mechanical Performance | ||
Item | Measuring Procedure | Requirements |
Cycle Life | Carry out 500cycle. Charge/discharge follow the below condition: ※ Charge: 1.0C charge to4.2V, cut off at 10mA ※ Discharge: 1200mA discharge for 5s, then rest 10s Cycle above discharge steps to 3.3V. ※ Rest time between charge/discharge: 30min. ※ Temperature: 25±2℃. |
Higher than 80% of the initial capacity |
Impact Test | A cell is to be placed on the impact flat. A 56mm diameter bar is inlayed into the bottom, A 10 kg weight is to be dropped from a height of 1m onto the cell, the distortion is allowed. | No explosion, No fire. |
Forced Discharge | Discharge at a current of 1C for 2.5h. | No explosion, No fire. |
Nail Pricking | Prick through the sample battery with a nail having a diameter of 3mm and remain 2h. | No explosion, No fire. |
Vibration test | After standard charge, the battery is to be tested as following conditions: Amplitude: 0.19mm Frequency: 10~55Hz (sweep: 1Hz/min) Direction: X/Y/Z axis for 30min. The battery is to be tested in three mutually perpendicular to each axis. |
No fire, no explosion, no smoking. |
Drop Test | Drop the battery in the shipment condition (full- charge) from 1m height onto 18~20 mm or thicker concrete with p-tile on it 1 times each of obverse and inverse directions at 25±2℃ | No fire, no explosion, no smoking |
Constant Humidity and Temperature Characteristics | Under the temperature of 20±5℃, after charging the battery with 0.2C, then put the battery into the constant temperature and humidity oven with 55±2℃ and 90~95% for 48h, the battery should be no obvious deformation, leakage, rust, smoking and explosion. After testing take out the battery then rest for 2h under the temperature of 20±5℃, discharge with 1C to 3.0V. | discharge capacity≥60% C5 |
Short-circuit test | After standard charge, the battery is to be short-circuited by connecting the positive and negative terminals of the battery with copper wire having a maximum resistance load of 0.1Ω. | No explosion, no fire. The temperature of the exterior cell casing shall not exceed 160℃. |
Heating test | A battery is to be heated in a gravity convection or circulating air oven. The temperature of the oven is to be raised at a rate of 5±2℃/min to a temperature of 130±2℃ at which temperature the oven is to remain for 30 minutes before the test is discontinued. |
No explosion, no fire. |
Abnormal charging test | After standard charge, the battery is subjected to a charging current by connecting it to a dc-power supply. The beginning current is 3.0C, which is to be obtained by connecting a resistor of specified size and rating in series with the battery; the voltage of the dc-power supply is 4.6V. The test time is 2.5 hours. | No explosion, no fire. |
Over-discharge Test | The fully discharged cell is continually discharged for 24h with the (30×n) Ω load at 23±2℃. | No explosion, no fire. |
High temperature characteristics | Within 2h leave the battery in constant temperature & constant humidity box which temperature is 55±2℃ after fully charge, discharge at 1C to 3.0V. The discharge time is required ≥51min | no deformation and smoking |
Low temperature characteristics | After fully charge, leave the battery in constant temperature & constant humidity box which temperature is -10±2℃ for 16-24h, discharge at 0.2C to 3.0V. The discharge time is required ≥3h | no deformation and smoking |
Shipping Information:
- FOB Port: Hong Kong/Shenzhen
- Lead Time: 15 - 25 days
Main Export Markets:
- Asia
- Australasia
- Eastern Europe
- North America
- Western Europe